Car Care Tips : People often go to the mechanic after the car battery gets damaged. In such a situation, if the battery has to be replaced, then they spend a lot of money for this too. In this news, know how you can easily do this work yourself. You must have seen or heard how much money people spend for the maintenance of the car. However, there are many such works which people can easily do themselves. But people do not have the right information, so people keep going to the mechanic even for simple work.
In such a situation, people have to give their time along with money. If the car battery gets damaged, the car does not start, in such a situation people take the help of a mechanic and get the battery replaced. For this they also pay a good amount to the mechanic. After the car battery gets damaged, you can also change the battery yourself. Know the details.
Method of opening the car battery
If the car battery gets damaged, open the bonnet of the car, then remove the cover from the battery. Here you will see two wires. One wire will be positive and the other negative node. After this you have to take wire number 12. If you do not have this, you can also use pliers or a wrench. After this, open the negative node and separate it. Then open the positive node and remove the battery.
Clean the battery thoroughly
After removing the battery, wear gloves on your hands and clean it. Here, first clean the nodes of the battery and for this you can use silicone spray. This spray will clean the dirt accumulated on the node of the battery.
Install a new battery like this
At the same time, to install a new battery in the car, first remove the battery box. However, the positive and negative node cover is not to be removed from the new battery. After this connect the negative and positive nodes. Tighten the nuts of both nodes properly. After this, put the battery cover. Then start the car and check. After installing a new battery in the car, drive the car for at least 30 minutes to charge it or keep the engine running.
